-
Backsaver ST Standard Tipper
The Backsaver ST Standard tipper is made to empty large plastic bins, tubs or crates at a work table height. The machine can be customized to handle dough-mixing bowls, standard bins, barrels and other containers.
The machine is used to pick up a bin of product, for example meat, fish or vegetables, and move it to the location for emptying. The bin is tipped in a smooth motion until the product starts to come out or even further to the maximum set angle. Since manual lifting, crouching and bending aren’t necessary, the risk of back pain, strain or injury is reduced.
Since Backsavers are powered by a rechargeable battery, they can be used anywhere on the work floor. The battery is suitable for operation in refrigerated areas, and with a fully charged battery you can handle approximately 50 tons of products.
Standard Features:
- Single hydraulic stainless steel cylinder
- Backup sound alarm
- Heavy-duty locking casters
- Powerful rechargeable battery
- Independent controls on each side
- Dead man’s (hold-to-run) buttons (Up/Down)
Examples of Available Options:
- Increased dumping height
- Tapered discharge chute / narrowed spout for improved product flow
- Extended discharge chute: up to 100 mm (4″) without changing the machine’s frame
- Raised discharge chute sides for improved product containment
- Different max. tipping angles: 90, 100 and 110 degrees
- Adjustable, swinging or customized retaining bar for various bin sizes
-
Backsaver LT Lifter/Tipper
The Backsaver LT lifter/Tipper can empty large bins when the Backsaver ST tipper’s dumping height is not enough. The LT machine is equipped with a specialty lift-and-tip system that enables raising a large, heavy bin to a certain height and then tilt it. The machine is also ideal for use at different locations or for installation at a specific, traffic-heavy location.
The macine is powered by a rechargeable battery, and can therefore be used anywhere on the work floor. The battery is suitable for operation in refrigerated areas, and with a fully charged battery you can handle approximately 40 tons of products.
Standard Features:
- Twin hydraulic stainless steel cylinders (1 ea. for lifting and tipping)
- Backup sound alarm
- LED flashing beacon light
- Heavy-duty locking casters
- Powerful rechargeable battery
- Independent controls on each side
- Dead man’s (hold-to-run) buttons (Up/Down)
Examples of Available Options:
- Extended-stroke lifting cylinder for dumping at heights of up to 1,410 mm at 100 degrees
- Tapered discharge chute / narrowed spout for improved product flow
- Extended discharge chute: up to 100 mm (4″) without changing the machine’s frame
- Raised discharge chute sides for improved product containment
- Adjustable, swinging or customized retaining bar for various bin sizes
- Different max. tipping angles: 90, 100 and 108 degrees
-
Backsaver CD Combo Bin Dumper
The Backsaver CD Combo Bin Dumper can empty heavy, extra-large plastic bins, combo bins, pallet crates, bulk boxes or octabins, as well as other large containers. The machine is equipped with a battery and twin hydraulic cylinders, and can tip bins of up to 1,500 kg / 3,500 lbs and up to 1,400 mm / 47.2″ high.
The Combo Bin Dumper can be used as a static machine, but is mobile and, thus, flexible to apply in different locations.
Standard Features:
- Twin hydraulic stainless steel cylinders (1 ea. for lifting and tipping)
- Backup sound alarm
- LED flashing beacon light
- Heavy-duty locking casters
- Powerful rechargeable batteries
- Independent controls on each side
- Dead man’s (hold-to-run) buttons (Up/Down)
Examples of Available Options:
- Tapered discharge chute / narrowed spout for improved product flow
- Plug-in (400 V) instead of battery-powered for stationary use
- Adjustable, swinging or customized retaining bar for various bin sizes
- Different max. tipping angles: 100 and 120 degrees
-
Backsaver SNT Byggy Lifter/Stacker
The Backsaver SNT Buggy Lifter/Stacker is designed for lifting standard DIN9797 200- or 300-liter meat carts, trolleys or buggies that must be placed on shelves for storage over extended periods of cooling, pickling, hardening or ripening.
The machine weighs just 300 kg and can be easily moved around the production facility to where the product is stored in buggies. It features a telescoping, upright jack column that makes it very compact and easy to handle.
Standard Features:
- Single hydraulic stainless steel cylinder
- Backup sound alarm
- LED flashing beacon light
- Heavy-duty locking casters
- Powerful rechargeable battery
- Independent controls on each side
- Dead man’s (hold-to-run) buttons (Up/Down)
Examples of Available Options:
- Plug-in (400 V) instead of battery-powered for stationary use
-
SK 800 MKB
SK 800 MKB is a belt-driven two-pillar lift designed for lifting and emptying large containers.
The lift is equipped with two pillars and belts instead of chains, which leads to better hygiene and easier maintenance. The belts also do not need to be lubricated or stretched.
The belt lift is suitable for all production companies in the food industry with demanding production processes and high demands on hygiene.
-
SK 800 HA
-
A-013026
-
Z-lift
-
Special 3
-
LP 1000
When you need to raise your product to a platform, table or simply bring it to a comfortable working height. We offer a wide range of level controllers which are adapted to your needs and wishes.
